Standards |
‧IEEE 802.3 10Base-T Ethernet
‧IEEE 802.3u 100Base-TX Fast Ethernet
‧IEEE 802.3ab 1000Base-T Gigabit Ethernet
‧IEEE802.3x Flow Control and Back Pressure,
‧IEEE802.3af for PoE; IEEE802.3at for PoE+ |
Switch Architecture |
‧Back-plane (Switching Fabric): 16Gbps |
Data Processing |
‧Store and Forward |
Flow Control |
‧IEEE 802.3x Flow Control and Back Pressure |
Jumbo Frame |
‧9KB |
Memory Buffer |
‧1M |
Mac Address |
‧8K MAC |
Interface |
‧8 x 10/100/1000 Mbps TP Jack (RJ-45) auto negotiation, Auto MDI/MDI-X function, Full/Half duplex, 802.3af/at PoE PSE port, 30W per port |
Network Cable |
‧UTP/STP above Cat.5e Cable EIA/TIA-568 10-ohm (100m) |
Protocol |
‧CSMA/CD |
LED Indicators |
‧Per unit: Power 1 (Green), Power 2 (Green), SW-relay (Amber)
‧Per port: Link/Active (Green), POE Detected (Amber) |
Reserve polarity protection |
‧Present |
Overload current protection |
‧Present |
Power Consumption |
‧5.76W@48 VDC full load, Without POE |
Power Supply |
‧Redundant Dual DC 48V-56V Power Input
‧PoE input 48-56VDC |
Alarm Relay Contact |
‧Relay outputs with current carrying capacity of 1A @24VDC
‧Relay in short circuit mode when 2 powers are connected. in open circuit mode when only one power supply is connected |
POE power |
‧POE power per port 30watts. Maximum 36Watts
‧Maximum total power 200Watts with 56VDC input, Supports IEEE802.3af/at |
Removable Terminal Block |
‧Provide 2 Redundant power , Alarm relay contact ,6 Pin
‧Wire range: 0.34mm^2 to 2.5mm^2
‧Solid wire (AWG):12-24/14-22
‧Stranded wire(AWG): 12-24/14-22
‧Torque:5lb-In/0.5Nm/0.56Nm
‧Wire Strip length: 7-8mm |
Environment |
‧Operating temperature : -40°C~75°C
‧Storage temperature: -40°C ~85°C
‧Operating Humidity: 5% to 95% (Non-Condensing)
|
Dimension |
‧142 x 36.2 x 105mm (LxWxD) |
Housing |
‧Rugged Metal ,IP30 Protection |
Installation |
‧DIN Rail and Wall Mount Design |
EMC/EMS |
‧CE, FCC |
EMI |
‧FCC Part 15 Subpart B Class A, CE EN 55022 Class A |